Description

We are bringing you our new state-of-the-art motor case for the old Joe Allure/APW motors.  I don’t know if these will work with Gridiron Buzz as I don’t have one of their motors.

This DOES NOT include the motor and will only fit the Joe Allure/APW Motor.

1. Just unscrew the top knob and release the motor from the old case.
2. Feed the cord through the case to completely free the motor from the old case.
3. Save the spring and knob as you will need them to install your motor into the new case.
4. Installation into the new case:
5. Feed the cord through the opening in the new case.
6. Add the spring to the top of the motor (around the long screw that is welded on)
7. Slide the motor into the new case and guide the long screw into the hole on top of the motor case.  It is easiest to do this with the top of the case facing up as the spring will not fall out.
8. Once the motor is seated in the case screw on the black knob.  Tighten it until most of the motor is in the case.
9. Push the cord from the motor into the notch on the top of the case.  This provides tension in case the cord is accidentally pulled.
10. Install the motor and adjust the black knob until the board runs smooth.